TOPIC: Another F'ing Mod - This Time with More Vacuum

Supposedly this is all my fault. When the condom is stretched out to it's normal length, I was supposed to roll it down until it was about a finger's length from the bell. Then, you pull the bunched condom over the bell. I guess the bunched condom will be thicker than the stretched condom. This condom, the $27 one, feels thicker and might be one of the new "indestructable" ones. I'm treating it like a baby.

str8chaser2002 wrote: Supposedly this is all my fault. When the condom is stretched out to it's normal length, I was supposed to roll it down until it was about a finger's length from the bell.

Then, you pull the bunched condom over the bell. I guess the bunched condom will be thicker than the stretched condom. This condom, the $27 one, feels thicker and might be one of the new "indestructable" ones. I'm treating it like a baby.

Ok, got it, thanks for explaining.

Hey guys for PF sleeve replacements, look into buying balloons and cutting the ends off - they're far more durable than the condoms and you can get like 100+ for super cheap lol

About the gains question, you'd be better waiting to see if Feldsan replies as I just tried this mod out for about a week to see if it was feasible.

Hi my friends,
Sorry for the absence.
Saw my name was called and here I am.
Good to see people helping people. That's what it's all about.
Love this thread. Long post coming. Reach the end. Your gonna like what you'll read!!!!

Ok. So, great tip by swandive about the cheap replacements for the sleeve.
First, i've never broke a sleeve. Seriously, i've been wearing PF and/of the SG mod for some time now and don't know how you can break it. But, if you do, that might be the way to go.
Remember, the name is condom sleeve, so treat it like a condom, roll it, put it over the bell and then unroll it. Easy.
Tip: Always, and i mean always use baby powder before using it (and, if you want, after). Just dump baby powder on it. Don't be conservative, baby powder is cheap, so use it in excess. hahah. Helps the longevity.

Now, to my situation.
I was using it really well until I broke the protector cap (stupid). This was 2 weeks ago.
At first, it was a tiny little hole, and, because i didn't stop using it and didn't fix it right away, it grew to a big one, to the point it was unusable (became unusable 1 week ago).



Gladly, today i fixed it (glued it with a special glue that the shoes store had - go to a shoes place, where they restore the shoe, glue the sole of the shoe, fix it, etc... to glue it if you've ripped the protector cap - actually, don't, see the tip below). The glue procedure resolved the problem, but it's not ideal. It didn't look good. Kind of like a operation scar. Nothing too bad, still very usable. But, the tip i'll give below kind of made it pointless.



I got the protector cap fixed. Sadly not before ordering 3 protector caps from the PF site. Did this a week ago. Why do I say sadly????
I paid $45 dollars for them (including shipping). In brazilian currency (reais) that's $150 bucks (3.35 is the exchange rate).
Today, the day i got my protector cap fixed (which is now rendered moot), I had the idea of going to a place where the tend to feet. Like a feet parlour. To see if they had any product that could protect a toe. Like i saw on the internet.
Some examples
US - www.drscholls.com/index.aspx
Brazilian site - www.sitedospes.com.br/protetores-para-os-pes/aneis-protetores/
There are lot's of it out there.



And see the one that looks like the SG thingy (caramel colored). I'm sure a feet place has someting close to what it is.



And, check the prices!!!!!!!!!!!!!!!
I mean, fuck, man. I got 2 "protector caps" from my feet place for $34 reais (That's 10 dollars //// 5 a piece!!!!!!!!!!!!!). hahahahahahah.
I have to laugh...
And they are great.



I have no doubt the the PF people order it like I did, directly from the feet place/industry, for a fraction of the price and sell it at an exorbitant price. Making a huge profit.
Got me thinking, 90% of the extra stuff that we need, we can find it outside of the original stores (where they are really expensive).
Bars (use screws - see below the specification), sleeve condom (use ballons - swandive's tip), protector caps (use toe protectors - as shown), the caramel coloured thing from the SG (use the toe protector shown above).
I mean, just do your due diligence. I know i should have done it, before ordering the protector cap from the site. But... lesson learned.

Anyway, back to the SG mod.
When using it, it became so confortable that i used it at work.
When you use this mod, you have to use all the bars and some more screws on top of the SG bars (and invert the bar order - you have to have an open bar at the top, so you can screw the screws on top of them).
The screws are a 4mm screw (here in Brazil, we use the imperial metric system). Check your local hardware store.



So... I've gained the all bars. Gained the all bars + smallest screw. Gained the all bars + second smallest screw. And i'm now at the third screw set.



Haven't measured for a while now (last one was before I reached the third set of screws). At that time, i've had gained 1 centimiter in erect lenght.
Now, i've got new protector caps (and learned a few things) and am stoked to get back to it, JELQ and BM full time.
Here's a photo of the SG mod working as good as new with the 'non-original protector cap'.



I'll post another photo in the next post where i'll ask for your help in something.
Best regards,
Feldsan.

I'm using the SG and putting a lot of tension.
Does anybody have any idea on how to hold the noozles in place at max tension?
Even with the clothespin, there is slippage.

Thanks.
Best regards,
Feldsan.

Another tip.
When using the mod,
Use the open part of the 'hook' upwards, not downwards.



When you put tension on the noozle, if the open part of the hook is downwards, the noozle will tend to unhook it, and it will be set loose.
If the open part is upwards, the noozle will tend to make the hook even more tight on the bell. Providing extra security.
Best regards,
Feldsan.

Feldsan,

Your help is much appreciated. I did the same thing as you and ordered new protector caps from the PF website (which are on their way now) and spent way too much money for them. After reading your post i googled "toe protector" and found a ton of them online from amazon to local drug stores. I went to the store yesterday and bought one for less than $6 and it seems way nicer than the one that came with the PF, it is longer and thicker than the original (hopefully providing better protection and lasting a while).

Now my biggest issue is the pain at the base of the device by my scrotum. I have tried baby powder, extra padding and moleskin to help but none have been a solution. The best thing that I have found is a rolled up sock, but it makes the thing way less discreet as the device points outward a bit. So now I am looking to alleviate this pain while keeping the thing as discreet as possible.

As for slippage, I don't use the noose provided but have found a way to use a piece of rope instead. Here's how I did it: I fed a piece of rope through the holes where the noose would fit through (creating a loop for the pump to fit through). Then, I fed the rope back up through where the comfort strap would go through. I wrap these ends of the rope around the sides of the support piece and hook them together using a knot and loop that I made on the ends.

With this mod I got rid of the piece on the PF that attaches to the belt and the rope sits where that piece would attach. Just make sure you have enough rope to easily loosen and open up the noose so you can stick the pump through, pull tight and attach and you are set. I haven't had any slipping with this mod.

What are your thoughts on wearing this at night? Has anyone tried it?

@Hipkey33
Sorry i've been away for so long.
Using it at night, and this is true with any device, will compromise the quality of your sleep.
But if you want, try it.
Put it in a more confortable amount of traction and do it.
Good luck.
Best regards,
Felsan.

Maybe I missed it....

But whats wrong with the extender/vac kits from autoextender.com?

Seems ALOT cheaper then buying a PF + SG and then the mods

@OscarHollywood
For me it wasn't a question of money. Not that i'm rich. It's that i've owned the SG and the PF for sometime now.
When I started PE i don't think the autoextender and it's mods were available.
Or maybe they were and i didn't look.
Most importantly, i trust Chris and the recommended equipment. Not that the others are bad.
And since i've already had them, I did this mod to make it more confortable and to kick it up a notch.
Best regards,
Feldsan.

Feldsan wrote: @OscarHollywood
For me it wasn't a question of money. Not that i'm rich. It's that i've owned the SG and the PF for sometime now.
When I started PE i don't think the autoextender and it's mods were available.
Or maybe they were and i didn't look.
Most importantly, i trust Chris and the recommended equipment. Not that the others are bad.
And since i've already had them, I did this mod to make it more confortable and to kick it up a notch.
Best regards,
Feldsan.

Hey any update from this mod?

Others see gains from it?